Bán tự động CG1-30 gas ngọn lửa máy cắt kim loại
The main body is made of aluminum of high strength by diecasting minutely Speed system is adjusted by controlled silicon.Oxygen acetylene hose is made of high quality rubber with advanced process. Attached quick connector for hose quick link. Quick switch is attached in pipe assembly for higher efficiency. Mainly for straight line cutting and for circular cutting>200mm diameter. Single torches cutting, groove range: I.Y.V 45degree Applied in shipbuilding, oil production, metallurgy, metal structure and other manufacturers etc.
1.Hose:The three hoses are used individually for fuel gas, preheating oxygen and cutting oxygen.
2. Cross hand wheel:To adjust the horizontal distance of torch
3. Cross gear rack
4.Vertical adjusting hand wheel of torch
5.Tip
6.Thermal baffle:To prevent the heat diffusing into the inner of machine.
7. Fuel gas two-port valve:To adjust gas-flow rate.
8. Gas distributor.
9.Clutch hand knob: &ldquoSTOP&rdquo is parting. &ldquoSTART&rdquois combination.
10. Body
11. Speed controller : Increase the speed from &ldquo0&rdquoto&ldquo10&rdquoDecease speed from &ldquo10&rdquo to &ldquo0&rdquo.
12. Outlet
13. Universal wheel
Parameter for CG1-30 Plasma cutting machine:
|
1.Weight |
:16 kg |
|
2. Machine dimension |
:470×230×240mm |
|
3. Speed control |
:silicon control |
|
4. Power source |
:AC 220V±10% 50/60HZ |
|
5. Cutting speed |
:50~750/mm/min |
|
6. Cutting thickness |
:5-100mm by flame, 0.3-10 by LGK-63A plasma |
|
7.Groove angle |
:0-45° |
|
8.Diameteral of cutting circle |
:ø200-ø2000mm |
|
9.Tip |
:G02(acetylene),G03(propane) |
|
10.Motor |
:DC 110V 50HZ 30W 4200r/min |
Package list for cg1-30 Plasma cutting machine:
|
1. Body |
1set |
|
2.Torch unit assemblage |
1set |
|
3. Moving unit assemblage |
1set(including left-right, up-down moving unit assemblage and gear rack) |
|
4. Tip (acetylene) |
3pcs |
|
5.Power wire |
1pc |
|
6.Specification sheets and certificate of qualification |
1pc each |
|
7.Gas-in connector /pressure cat |
1set |
|
8.Ball-pane screw M4 |
2pcs |
|
Standard accessory |
|
|
1.Cutting circle unit assemblage |
1set |
|
2.convex guide rail |
2pcs(1.8m/pc)or grooved guide rail 1pc(1.8m) |
The main body is made of aluminum of high strength by diecasting minutely Speed system is adjusted by controlled silicon.Oxygen acetylene hose is made of high quality rubber with advanced process. Attached quick connector for hose quick link. Quick switch is attached in pipe assembly for higher efficiency. Mainly for straight line cutting and for circular cutting>200mm diameter. Single torches cutting, groove range: I.Y.V 45degree Applied in shipbuilding, oil production, metallurgy, metal structure and other manufacturers etc.
1.Hose:The three hoses are used individually for fuel gas, preheating oxygen and cutting oxygen.
2. Cross hand wheel:To adjust the horizontal distance of torch
3. Cross gear rack
4.Vertical adjusting hand wheel of torch
5.Tip
6.Thermal baffle:To prevent the heat diffusing into the inner of machine.
7. Fuel gas two-port valve:To adjust gas-flow rate.
8. Gas distributor.
9.Clutch hand knob: &ldquoSTOP&rdquo is parting. &ldquoSTART&rdquois combination.
10. Body
11. Speed controller : Increase the speed from &ldquo0&rdquoto&ldquo10&rdquoDecease speed from &ldquo10&rdquo to &ldquo0&rdquo.
12. Outlet
13. Universal wheel
Parameter for CG1-30 Plasma cutting machine:
|
1.Weight |
:16 kg |
|
2. Machine dimension |
:470×230×240mm |
|
3. Speed control |
:silicon control |
|
4. Power source |
:AC 220V±10% 50/60HZ |
|
5. Cutting speed |
:50~750/mm/min |
|
6. Cutting thickness |
:5-100mm by flame, 0.3-10 by LGK-63A plasma |
|
7.Groove angle |
:0-45° |
|
8.Diameteral of cutting circle |
:ø200-ø2000mm |
|
9.Tip |
:G02(acetylene),G03(propane) |
|
10.Motor |
:DC 110V 50HZ 30W 4200r/min |
Package list for cg1-30 Plasma cutting machine:
|
1. Body |
1set |
|
2.Torch unit assemblage |
1set |
|
3. Moving unit assemblage |
1set(including left-right, up-down moving unit assemblage and gear rack) |
|
4. Tip (acetylene) |
3pcs |
|
5.Power wire |
1pc |
|
6.Specification sheets and certificate of qualification |
1pc each |
|
7.Gas-in connector /pressure cat |
1set |
|
8.Ball-pane screw M4 |
2pcs |
|
Standard accessory |
|
|
1.Cutting circle unit assemblage |
1set |
|
2.convex guide rail |
2pcs(1.8m/pc)or grooved guide rail 1pc(1.8m) |
Bạn cần đăng nhập để chat với shop
Đăng nhập ngay