Đèn LED Tín Hiệu Rẽ 48 Inch 60 Inch Mới Giá Trực Tiếp Từ Nhà Máy Thanh Đèn Đuôi Xe Màu Trắng Hổ Phách Màu Đỏ Cho Xe Tải Dodge Ram Pickup

Specifications

1. DC12V operate
2. 122cm size with black casing.
3. 4pin plug with 100cm 4 color wires
4. totally 60pcs Red &Yellow LEDs and 30 white LED, with running, reverse, left turn & right turn, brake fuction

Warning: The installation of this kit is recommended to be installed by a licensed professional. The improper installation of this kit will void all warranties.

Please read the following instructions thoroughly before installing this kit.

1. First using a tape measure, measure the lip under your trucks tailgate to ensure there is enough clearance to mount your tailgate light bar.

2. Following your trucks owner&rsquos manual, carefully remove the tailgate from your truck.

3. Use the included 3M tape to temporarily mount the LED light bar to your trucks tailgate.

4. Using a 1/8th drill bit, pre drill the four mounting holes into your trucks tailgate, this will make the following step much easier.

5. Securely mount the tailgate light bar to your truck using a drill and the provided screws.

6. Run the power wire with flat 4 pin connector behind your bumper and to your trucks flat 4 pin connection. You may need to secure the slack in the wire so that it does not hang below the bumper.

If you purchased LED Tailgate Light Bar with Reverse Light Option proceed with your installation using the following steps:

1. Carefully remove one of your tail light assemblies.

2. Power your truck on and put it into reverse, so that your factory reverse lights are illuminated. It is imperative that you set the parking brake.

3. Return to the rear of your truck and remove the bulb from your reverse light.

4. Using a volt meter, find the positive 12 volt wire that powers your reverse light.

5. Once you have found your factory reverse light wire, use a wire stripper to cut and strip the wire.

6. Run the light bar&rsquos white reverse wire to your factory reverse wire.

7. Use a butt connector to connect the tailgate bar&rsquos white reverse wire to the trucks factory reverse wire. You can also solder or use a 3M&trade Scotchlok&trade type connector to secure this connection.

8. Now you can re-install your tail light assembly and tailgate, and test your tailgate light bar for full functionality.

Flat 4 Pin Connector Diagram:

A - Red Wire: Ground

B - White Wire: Running Lamp                 

C - Green Wire: Left Turn Signal

D - Black Wire: Right Turn Signal

R: Orange Wire : Reverse Wire-

E: Blake Wire - Brake Light

Brighter Than Expected High-quality LED chips emit bright and white light, reflector cups produce concentrated spot beam for long distance irradiation.	Extraordinary Waterproof Performance The Led light is well sealed by waterproof rubber pad and silicone sealing strip, fastening screws enhance the waterproof effect.	Outstanding Features With hard and durable aluminum alloy housing, quakeproof mounting bracket and cooling fins, the lifespan is over 30,000 hours.

Shenzhen Kingshow Star Technology Co., Limited was established in shenzhen and our factory is located in Shenzhen, China. King Show covers an area of 6,000 square meters and has about 400 employees, including 30 highly qualified staff members of specialists and engineers. We are a high-tech manufacturer specialized in led motorcycle light kit ,led auto/under light kit ,custom and normal LED strips, LED lamps, LED spotlights, LED bulbs, car lamps, wall washers, down lights, bedside lamps and other related LED products. Most of our products have CE and RoHS certificates. More than 90 percent of our products are delivered to Europe, North America and Australia.

>>Click to See More Product

King Show can satisfy your customized needs with our unparalleled advantages. We have been concentrating on the development, design and production of various electrical lighting appliances, such as automobile exquisite articles and colorful LED with professional technique, and we have been keeping good and direct business cooperation with the best LED chip suppliers in the USA and South Korea. Taking quality as priority, our QC staff members inspect all products piece by piece before delivery. Adequate tests must be conducted. We ensure that our products have good designs and top quality.

Why choose us:
1) High Quality 2) Quick Delivery 3) Lowest Cost 4) High Turnover 5) High Efficiency 6) Customers' Satisfaction

Our objective is to establish a long-term and steady relationship with you and we hope to become your reliable cooperative partner.Click to See Factory:https://kingshowlight.en.alibaba.com

1.Your inquiry related to our products or prices will be replied in 24hours.

2.Well-trained and experienced staffs to answer all your enquires in fluent English.

3.Distributor ship is offered for your unique design and some our current models.

4.Protection of your sales area, ideas of design and all your private information.

5.OEM & ODM are welcomed, OEM brand is available.

1. Are sample orders acceptable?

Sample orders available, pls contact us for any specific requirements via telephone, mail or online trademanager.

2.Which payment do you support?

Paypal, T/T, Western Union and bank transfer available.

3.When will you send the goods afer payment?

Delivery within 5-10 working days after the payment has been confirmed.

4.How long the quality warrenty of your warrenty will be?>>Click to See More Product

- All of our products are 12 months quality warranty.
- Any problems happened, buyers should submit proof to us by pics if possible.
- No return original lights, free lights will be offered.
- Anyway by nice communications, we can find a way to make you satisfied.

Send your Inquiry Details in the Below,Click "Send" Now!