Duy nhất Giai Đoạn 220V Điện Áp Leiqie CẮT Plasma 60 Plasma Nguồn Điện
5
999
Đã bán
16.488.875đ
13.952.125đ ~ 16.488.875đ
Đánh giá Điện Áp Đầu Vào: 14.5AMở Mạch Điện Áp (OCV): 308V
Max. Sản Lượng Hiện Tại: 60AVideo Gọi Đi-Kiểm Tra: Cung Cấp
Máy Móc Báo Cáo Thử Nghiệm: Cung CấpTiếp Thị Loại: Sản Phẩm Mới 2020
Bảo Hành Của Core Thành Phần: 1 NămCore Thành Phần: Động Cơ
Max. Điện Áp Đầu Ra: 160VXếp hạng Duty Cycle @ 40 °C: 60%
Điều kiện: MớiNơi xuất xứ: Shandong, China
Nhãn hiệu: China Huayuan BrandĐiện áp: 1 phase 220V 50/60Hz
Công suất: 9KVAKích thước (L * W * H): 570*370*410mm
trọng lượng: 25kgNăm: 2020
Bảo hành: 1 NămÁp dụng Các Ngành Công Nghiệp: Vật Liệu xây dựng Cửa Hàng, Máy móc Cửa Hàng Sửa Chữa, In ấn Cửa Hàng, Xây dựng làm việc, Công Ty quảng cáo
Phòng Trưng Bày Trí: Việt Nam, Brasil, Mexico, Chile, Algérie, BangladeshProduct name: CUT 60 Plasma Power Source
Type: Air plasma cutting machineBrand: Leiqie
Current: DCControl way: CNC
Application: CNC plasma cuttingFrequency band: High frequency
Process material: MetalPrinciple: Inverter
In stock: YesDịch vụ sau bán hàng cung cấp: Miễn Phí Các Bộ Phận Dự Phòng, Lĩnh vực cài đặt, vận hành và đào tạo, Lĩnh Vực Bảo Trì Và Dịch Vụ Sửa Chữa, Hỗ Trợ Trực Tuyến, Video Hỗ Trợ Kỹ Thuật
Sau Khi Dịch Vụ Bảo Hành: Video Hỗ Trợ Kỹ Thuật, Hỗ Trợ Trực Tuyến, Các Bộ Phận Dự Phòng, Lĩnh Vực Bảo Trì Và Dịch Vụ Sửa ChữaĐịa Phương Phục Vụ Vị Trí: Peru, Indonesia, Thái Lan, Chile, Algérie
Chứng nhận: 3C CE ISO
Product Description
Advantage of CUT 60 plasma power source:
1. High quality soft switch inverter technology, high efficiency, light weight.
2. High power IGBT module switch design circuit, high reliability.
3. Wide grid voltage adaptability.
4. Arc - starting current slow - rising function, it can effectively extend the service life of cutting torch’s electrode and
nozzle.
5. Easy arc starting, stable arc, good arc stiffness, smooth cut, superior process performance.
6. Fast cutting speed, narrow and smooth incision plain needle Small deformation, save material.
7. Using cheap air as cutting gas, low cost.
8. Some models have all the signal output required by NUMERICAL control, which is suitable for numerical control automatic cutting.
9. High load continuity rate and long working time at maximum current.
1. High quality soft switch inverter technology, high efficiency, light weight.
2. High power IGBT module switch design circuit, high reliability.
3. Wide grid voltage adaptability.
4. Arc - starting current slow - rising function, it can effectively extend the service life of cutting torch’s electrode and
nozzle.
5. Easy arc starting, stable arc, good arc stiffness, smooth cut, superior process performance.
6. Fast cutting speed, narrow and smooth incision plain needle Small deformation, save material.
7. Using cheap air as cutting gas, low cost.
8. Some models have all the signal output required by NUMERICAL control, which is suitable for numerical control automatic cutting.
9. High load continuity rate and long working time at maximum current.
Detailed Images
Ambient temperature 40 ℃,60% load persistence, suitable for heavy load industrial high-intensity operations.
Connect port of front
Connect port of back
Control panel
Air fan
P80 plasma cutting torch
Fine cutting nozzle and electrode
Size Information
Technical parameters of CUT 60 plasma power source.
No. | Model | CUT 60 |
1 | Voltage | 1 phase 220V 50/60Hz |
2 | Rated power | 9KVA |
3 | Rated output current | 60A |
4 | Rated output voltage | 105.2V |
5 | Rated load sustained rate | 60% at 40℃ |
6 | Output unloading voltage | 308V |
7 | Adjust range of voltage | 30-60A |
8 | Air pressure | 0.4-0.5Mpa |
9 | Quality cutting thickness | 12mm (carbon steel) |
10 | Max cutting thickness | 25mm (steel material) |
11 | Insulation grade | F |
12 | Cooling way | Air cooling |
13 | Protection grade | IP21S |
14 | Dimension | 570*310*470mm |
15 | Weight | 25kg |
Working pictures
Application of CUT 60 plasma power source:
The plasma power supply is mainly used for cutting metal materials such as carbon steel, stainless steel, and aluminum. It is widely used in shipbuilding, steel structure construction, engineering machinery, locomotive manufacturing, boilers, water conservancy and hydropower, petrochemical, mechanical processing and other industries.
The plasma power supply is mainly used for cutting metal materials such as carbon steel, stainless steel, and aluminum. It is widely used in shipbuilding, steel structure construction, engineering machinery, locomotive manufacturing, boilers, water conservancy and hydropower, petrochemical, mechanical processing and other industries.
Gantry CNC cutting machine is a kind of cutting and blanking equipment with extremely wide application. The professional mechatronics equipment combined with computer and software can cut any shape of plate or tube workpiece, improve cutting quality and efficiency, and increase material utilization. The stability of the cutting rate and cutting quality reduces the labor intensity of workers.
CNC Plasma cutting: It is a processing method that uses the heat of a high-temperature plasma arc to partially melt or evaporate the metal at the incision of the workpiece, and uses the momentum of the high-speed plasma to remove the molten metal to form an incision.
Related Products
Packing&Shipping
Company Introduction
Shandong Jiaxin Machinery Equipment Co.,Ltd.located in the hometown of Confucius and Mencius-Jining City, northwest of excellent transport location for communication between business and customers to provide a great convenience and fast.
Science and technology are primary productive forces"continuous advancement of technology is the development of the eternal source of power. The factory after nearly 20 years of development from a roller mold factory into a large-scale production of cold. Hot-rolled steel processing equipment. CNC steel processing equipment five series more than thirty kinds of products manufacturer enterprises.
We have always adhered to the "integrity of management, quality first” business philosophy customer for Gud&aposs business objectives. Through a nationwide sales and service network, improve the pre-sale, selling service and after sale service sincere cooperation by providing quality products and efficient service for you.
Our Services & Strength
1.Pre-Sales Service:
1)Inquiry and consulting support.
2)We provide you the friendly English user manual and testing video free.
3)24 hours technical support by email or calling.
2.After-Sales Service:
1)Video of operating the machine are available.
2)12 months warranty quality guarantee and charge free technical support forever.
3)Free training to make sure you master the operating of machine.
FAQ
Q: What&aposs the delivery time?
A: 10-15 working days to delivery port.
Q: What&aposs the usually delivery terms?
A: FOB, CNF, CIF, Exworks will be OK.
Q: What&aposs the MOQ?
A: 1 set.
Q: What’s the payment term?
A: We accept T/T, L/C or Cash.
Q: What&aposs your delivery port?
A: Usually Qingdao port, Shanghai port.
Q: What&aposs the packing?
A: Iron Pallet and Plywood cases or carton or depending on your requires.
Q: Can I change the motor to my local voltage and frequency, Is thereany extra charge?
A: Yes, we can supply motor with frequency and voltage according to local standard. Such as 220V/380V/410V/415V/440V, and 50HZ/60HZ without extra charge.
Q: Can you place OEM orders?
A: Yes,OEM orders are acceptable. We can manufacture machines according to your requirement with your design,logo,color,materials or brand information.
Q:Where is your factory located? How can I visit there?
A:Our factory is located in Jining City, Shandong Province, China, about 2 hours from Beijing, 3 hours from Shanghai.
Số lượng
Chọn loại hàng (ví dụ:màu sắc ,kích thước)
Thông số sản phẩm
0%
13.952.125đ
w3UifHGunk
Mô tả sản phẩm
Đánh giá Điện Áp Đầu Vào: 14.5AMở Mạch Điện Áp (OCV): 308V
Max. Sản Lượng Hiện Tại: 60AVideo Gọi Đi-Kiểm Tra: Cung Cấp
Máy Móc Báo Cáo Thử Nghiệm: Cung CấpTiếp Thị Loại: Sản Phẩm Mới 2020
Bảo Hành Của Core Thành Phần: 1 NămCore Thành Phần: Động Cơ
Max. Điện Áp Đầu Ra: 160VXếp hạng Duty Cycle @ 40 °C: 60%
Điều kiện: MớiNơi xuất xứ: Shandong, China
Nhãn hiệu: China Huayuan BrandĐiện áp: 1 phase 220V 50/60Hz
Công suất: 9KVAKích thước (L * W * H): 570*370*410mm
trọng lượng: 25kgNăm: 2020
Bảo hành: 1 NămÁp dụng Các Ngành Công Nghiệp: Vật Liệu xây dựng Cửa Hàng, Máy móc Cửa Hàng Sửa Chữa, In ấn Cửa Hàng, Xây dựng làm việc, Công Ty quảng cáo
Phòng Trưng Bày Trí: Việt Nam, Brasil, Mexico, Chile, Algérie, BangladeshProduct name: CUT 60 Plasma Power Source
Type: Air plasma cutting machineBrand: Leiqie
Current: DCControl way: CNC
Application: CNC plasma cuttingFrequency band: High frequency
Process material: MetalPrinciple: Inverter
In stock: YesDịch vụ sau bán hàng cung cấp: Miễn Phí Các Bộ Phận Dự Phòng, Lĩnh vực cài đặt, vận hành và đào tạo, Lĩnh Vực Bảo Trì Và Dịch Vụ Sửa Chữa, Hỗ Trợ Trực Tuyến, Video Hỗ Trợ Kỹ Thuật
Sau Khi Dịch Vụ Bảo Hành: Video Hỗ Trợ Kỹ Thuật, Hỗ Trợ Trực Tuyến, Các Bộ Phận Dự Phòng, Lĩnh Vực Bảo Trì Và Dịch Vụ Sửa ChữaĐịa Phương Phục Vụ Vị Trí: Peru, Indonesia, Thái Lan, Chile, Algérie
Chứng nhận: 3C CE ISO
Product Description
Advantage of CUT 60 plasma power source:
1. High quality soft switch inverter technology, high efficiency, light weight.
2. High power IGBT module switch design circuit, high reliability.
3. Wide grid voltage adaptability.
4. Arc - starting current slow - rising function, it can effectively extend the service life of cutting torch’s electrode and
nozzle.
5. Easy arc starting, stable arc, good arc stiffness, smooth cut, superior process performance.
6. Fast cutting speed, narrow and smooth incision plain needle Small deformation, save material.
7. Using cheap air as cutting gas, low cost.
8. Some models have all the signal output required by NUMERICAL control, which is suitable for numerical control automatic cutting.
9. High load continuity rate and long working time at maximum current.
1. High quality soft switch inverter technology, high efficiency, light weight.
2. High power IGBT module switch design circuit, high reliability.
3. Wide grid voltage adaptability.
4. Arc - starting current slow - rising function, it can effectively extend the service life of cutting torch’s electrode and
nozzle.
5. Easy arc starting, stable arc, good arc stiffness, smooth cut, superior process performance.
6. Fast cutting speed, narrow and smooth incision plain needle Small deformation, save material.
7. Using cheap air as cutting gas, low cost.
8. Some models have all the signal output required by NUMERICAL control, which is suitable for numerical control automatic cutting.
9. High load continuity rate and long working time at maximum current.
Detailed Images
Ambient temperature 40 ℃,60% load persistence, suitable for heavy load industrial high-intensity operations.
Connect port of front
Connect port of back
Control panel
Air fan
P80 plasma cutting torch
Fine cutting nozzle and electrode
Size Information
Technical parameters of CUT 60 plasma power source.
No. | Model | CUT 60 |
1 | Voltage | 1 phase 220V 50/60Hz |
2 | Rated power | 9KVA |
3 | Rated output current | 60A |
4 | Rated output voltage | 105.2V |
5 | Rated load sustained rate | 60% at 40℃ |
6 | Output unloading voltage | 308V |
7 | Adjust range of voltage | 30-60A |
8 | Air pressure | 0.4-0.5Mpa |
9 | Quality cutting thickness | 12mm (carbon steel) |
10 | Max cutting thickness | 25mm (steel material) |
11 | Insulation grade | F |
12 | Cooling way | Air cooling |
13 | Protection grade | IP21S |
14 | Dimension | 570*310*470mm |
15 | Weight | 25kg |
Working pictures
Application of CUT 60 plasma power source:
The plasma power supply is mainly used for cutting metal materials such as carbon steel, stainless steel, and aluminum. It is widely used in shipbuilding, steel structure construction, engineering machinery, locomotive manufacturing, boilers, water conservancy and hydropower, petrochemical, mechanical processing and other industries.
The plasma power supply is mainly used for cutting metal materials such as carbon steel, stainless steel, and aluminum. It is widely used in shipbuilding, steel structure construction, engineering machinery, locomotive manufacturing, boilers, water conservancy and hydropower, petrochemical, mechanical processing and other industries.
Gantry CNC cutting machine is a kind of cutting and blanking equipment with extremely wide application. The professional mechatronics equipment combined with computer and software can cut any shape of plate or tube workpiece, improve cutting quality and efficiency, and increase material utilization. The stability of the cutting rate and cutting quality reduces the labor intensity of workers.
CNC Plasma cutting: It is a processing method that uses the heat of a high-temperature plasma arc to partially melt or evaporate the metal at the incision of the workpiece, and uses the momentum of the high-speed plasma to remove the molten metal to form an incision.
Related Products
Packing&Shipping
Company Introduction
Shandong Jiaxin Machinery Equipment Co.,Ltd.located in the hometown of Confucius and Mencius-Jining City, northwest of excellent transport location for communication between business and customers to provide a great convenience and fast.
Science and technology are primary productive forces"continuous advancement of technology is the development of the eternal source of power. The factory after nearly 20 years of development from a roller mold factory into a large-scale production of cold. Hot-rolled steel processing equipment. CNC steel processing equipment five series more than thirty kinds of products manufacturer enterprises.
We have always adhered to the "integrity of management, quality first” business philosophy customer for Gud&aposs business objectives. Through a nationwide sales and service network, improve the pre-sale, selling service and after sale service sincere cooperation by providing quality products and efficient service for you.
Our Services & Strength
1.Pre-Sales Service:
1)Inquiry and consulting support.
2)We provide you the friendly English user manual and testing video free.
3)24 hours technical support by email or calling.
2.After-Sales Service:
1)Video of operating the machine are available.
2)12 months warranty quality guarantee and charge free technical support forever.
3)Free training to make sure you master the operating of machine.
FAQ
Q: What&aposs the delivery time?
A: 10-15 working days to delivery port.
Q: What&aposs the usually delivery terms?
A: FOB, CNF, CIF, Exworks will be OK.
Q: What&aposs the MOQ?
A: 1 set.
Q: What’s the payment term?
A: We accept T/T, L/C or Cash.
Q: What&aposs your delivery port?
A: Usually Qingdao port, Shanghai port.
Q: What&aposs the packing?
A: Iron Pallet and Plywood cases or carton or depending on your requires.
Q: Can I change the motor to my local voltage and frequency, Is thereany extra charge?
A: Yes, we can supply motor with frequency and voltage according to local standard. Such as 220V/380V/410V/415V/440V, and 50HZ/60HZ without extra charge.
Q: Can you place OEM orders?
A: Yes,OEM orders are acceptable. We can manufacture machines according to your requirement with your design,logo,color,materials or brand information.
Q:Where is your factory located? How can I visit there?
A:Our factory is located in Jining City, Shandong Province, China, about 2 hours from Beijing, 3 hours from Shanghai.
Bán chạy
Sản phẩm đã xem
13.952.125đ ~ 16.488.875đ
Số lượng
Số Mô Hình
Chat
Bạn cần đăng nhập để chat với shop
13.952.125đ ~ 16.488.875đ
Số lượng
Số Mô Hình
Bạn có muốn huỷ bỏ đơn hàng này không ?