Gỗ Pallet Khối Máy chip khối Pallet Máy Pallet khối máy đùn
663
Đã bán
205.024.646đ
195.120.074đ ~ 205.024.646đ
205.024.646đ
195.120.074đ ~ 205.024.646đ
Chọn loại hàng (ví dụ:màu sắc ,kích thước)
Thông số sản phẩm
0%
195.120.074đ
uQvovqUk6c
Mô tả sản phẩm
Nơi xuất xứ: Henan, ChinaNhãn hiệu: BEDO
Điều kiện: MớiLoại Máy Máy: Gỗ mùn cưa khối máy
Video Gọi Đi-Kiểm Tra: Cung CấpMáy Móc Báo Cáo Thử Nghiệm: Cung Cấp
Tiếp Thị Loại: 2024 sản phẩm nóngBảo Hành Của Core Thành Phần: 15 tháng
Core Thành Phần: PLC, Động CơBảo hành: 1 Năm
Trọng lượng (KG): 1400 KGĐiện (kW): 18kw
Key Điểm Bán Hàng: Năng Suất caoPhòng Trưng Bày Trí: Nước Pháp, Philippines, Tây Ban Nha, Thái Lan, Chile, Algérie, Nhật Bản
Áp dụng Các Ngành Công Nghiệp: Vật Liệu xây dựng Cửa Hàng, Máy móc Cửa Hàng Sửa Chữa, Nhà Máy sản xuất, Các trang trại, Nhà Sử Dụng, Năng lượng & Khai Thác MỏTên: Gỗ mùn cưa khối máy làm để Bán dây chuyền sản xuất
Loại: Ép nóngSức chứa: Theo các mô hình khác nhau
Sử dụng: Làm pallet gỗNguyên liệu thô: Mùn cưa gỗ
Màu sắc: Nhu cầu của khách hàngLợi thế: Hiệu quả cao chi phí thấp
Chứng nhận: Chứng nhận CEKích thước (L * W * H): Theo các mô hình khác nhau
Gói: Trường hợp bằng gỗ
Wood Pallet Block Machine Chip Block Pallet Machine Pallet Block Extruder Machine
Product Description
Wooden pier machine generally with wood shavings, wood chips, rotten boards, branches and other waste as raw materials, the raw materials are screened and classified to prevent the raw materials containing metal and other hard sundries and damage the machine. Then crushed by the grinder (when the raw material is less than 5*5mm, it does not need to be crushed), into the dryer drying, glue mixing machine sizing, and then through the hot press grinding tool hydraulic forming, extrusion into wooden pier products, cut into small cubes of products required by customers.
Raw Materials and Final Production
Features & Advantages
The quality of the wooden pier hot press is advanced, the surface of the wooden pier tray feet is smooth and flat, good waterproof (no cracking after soaking in water for 48 hours, no cracking under the wind and sun), and strong nailforce.
Moulds can be customized according to the specifications and sizes of customers' requirements. The products made are exempt from inspection and fumigation, and the formaldehyde release (E2) are in line with national standards. The internal bonding strength is up to 1.07mpa. The vertical screw holding force is 1590N, and the flat behavior is 1660N, which is the ideal material for making non-fumigating wooden pallet support (foot pier, frame leg). It is mainly used to replace the foot pier used on the log pallet,which is free from fumigation and heat treatment.
Moulds can be customized according to the specifications and sizes of customers' requirements. The products made are exempt from inspection and fumigation, and the formaldehyde release (E2) are in line with national standards. The internal bonding strength is up to 1.07mpa. The vertical screw holding force is 1590N, and the flat behavior is 1660N, which is the ideal material for making non-fumigating wooden pallet support (foot pier, frame leg). It is mainly used to replace the foot pier used on the log pallet,which is free from fumigation and heat treatment.
1) Compared with the multi-layer board, the specifications are unified and the appearance is consistent, which improves the appearance and grade of the product.
2) Smooth on all sides without polishing. Good waterproof (48 hours of soaking water does not crack, wind and sun does not crack),strong nailing force. Different from the whole board cut wood chip pier, rough surface easy to drop slag
3) Evenly heating around and in the middle, glue curing thoroughly, product strength is high.
4) Surface smooth water is not easy to penetrate, and the fiber bonding force of the shavings itself makes the products have excellent water resistance.
5) The raw material itself has more crude fiber, internal crisscross and strong structural force, so it is not easy to crack after eating nails.
6) Moulds are customized according to the specifications and sizes required by customers, and the products are exempted from export inspection and fumigation, and the formaldehyde emission (E2 can be provided as SGS) all meet the national standards.
7) The equipment is less investment, the cost is less than one third of the ordinary plate press. Because of the different
principle of production technology, the gloss and waterproof of the product is no match for the wood chip pier of thick shavings and sawboards.
2) Smooth on all sides without polishing. Good waterproof (48 hours of soaking water does not crack, wind and sun does not crack),strong nailing force. Different from the whole board cut wood chip pier, rough surface easy to drop slag
3) Evenly heating around and in the middle, glue curing thoroughly, product strength is high.
4) Surface smooth water is not easy to penetrate, and the fiber bonding force of the shavings itself makes the products have excellent water resistance.
5) The raw material itself has more crude fiber, internal crisscross and strong structural force, so it is not easy to crack after eating nails.
6) Moulds are customized according to the specifications and sizes required by customers, and the products are exempted from export inspection and fumigation, and the formaldehyde emission (E2 can be provided as SGS) all meet the national standards.
7) The equipment is less investment, the cost is less than one third of the ordinary plate press. Because of the different
principle of production technology, the gloss and waterproof of the product is no match for the wood chip pier of thick shavings and sawboards.
The production line
Crusher or Wood shaving machine
(it is used for the raw material with much large size)
Please use wood shavings and sawdust to make pallets. If the raw material is not very big, it is
unnecessary to crush.
Dryer machine
Drying the raw material to keep the 10%-15% moisture.
Gluing machine
Mixing the material together tighter for next step.
Hot press machine
Please use wood shavings and sawdust to make pallets. If the raw material is not very big, it is
unnecessary to crush.
Dryer machine
Drying the raw material to keep the 10%-15% moisture.
Gluing machine
Mixing the material together tighter for next step.
Hot press machine
(main machine of the wood block production line)
Three types of models of the hot press machine
Three types of models of the hot press machine
Specifications
Model | Capacity | Block density | Power | Weight | Size |
BD-HP75*75 | 3-4m³/24h | 550-600kg/m³ | 12kw | 1050kg | 4800*780*1320mm |
BD-HP80*80 | 3-4m³/24h | 550-600kg/m³ | 12kw | 1100kg | 4800*780*1320mm |
BD-HP80*90 | 3-4m³/24h | 550-600kg/m³ | 15kw | 1150kg | 4800*780*1320mm |
BD-HP90*90 | 4-5m³/24h | 550-600kg/m³ | 15kw | 1200kg | 4800*780*1320mm |
BD-HP100*100 | 4-5m³/24h | 550-600kg/m³ | 16kw | 1300kg | 4800*780*1320mm |
BD-HP100*120 | 4-5m³/24h | 550-600kg/m³ | 18kw | 1350kg | 4800*780*1320mm |
BD-HP120*120 | 4-5m³/24h | 550-600kg/m³ | 18kw | 1400kg | 4800*780*1320mm |
BD-HP120*140 | 5-6m³/24h | 550-600kg/m³ | 19kw | 1450kg | 4800*780*1320mm |
BD-HP140*145 | 5-6m³/24h | 550-600kg/m³ | 19kw | 1500kg | 4800*780*1320mm |
Company Introduction
FAQ
Q: Are you a trade company or a manufacturer? A: We are a manufacturer, welcome to visit our factory and check the machines.
Q: How long is your delivery time?
A: Generally it is 5-7 days if the goods are in stock. Or it is 15-20 days if the goods are not in stock, we can discuss before
contract.
Q: Could you supply all the parameters about the machines?
A: Yes, we can supply all the parameters, price, layout drawing, factory design etc.
Q: What is your terms of payment ?
A: 50% T/T payment in advance, balance payment before shippment after inspection. It is negotiable.
Q: How long is your delivery time?
A: Generally it is 5-7 days if the goods are in stock. Or it is 15-20 days if the goods are not in stock, we can discuss before
contract.
Q: Could you supply all the parameters about the machines?
A: Yes, we can supply all the parameters, price, layout drawing, factory design etc.
Q: What is your terms of payment ?
A: 50% T/T payment in advance, balance payment before shippment after inspection. It is negotiable.
Bán chạy
Sản phẩm đã xem
195.120.074đ ~ 205.024.646đ
Số lượng
Số Mô Hình
Chat
Bạn cần đăng nhập để chat với shop
Đăng nhập ngay
195.120.074đ ~ 205.024.646đ
Số lượng
Số Mô Hình
Bạn có muốn huỷ bỏ đơn hàng này không ?