Hiệu Suất Cao Và Ứng Dụng Rộng Rãi Gỗ Mùn Cưa Ống Máy Sấy Gạo Trấu Máy Sấy
663
Đã bán
73.046.221đ
38.627.832đ ~ 73.046.221đ
73.046.221đ
38.627.832đ ~ 73.046.221đ
Chọn loại hàng (ví dụ:màu sắc ,kích thước)
Thông số sản phẩm
0%
38.627.832đ
kSvAbiUvAe
Mô tả sản phẩm
Nơi xuất xứ: Henan, ChinaNhãn hiệu: BEDO
Ứng dụng: KhôCác tính năng: Kinh Tế
Điều kiện: MớiNăng lực sản xuất: 400-600 kg/giờ
Bảo hành: 1 NămKích thước (L * W * H): 2500*1500*2400m m
Điện áp: 380V,50HzÁp dụng Các Ngành Công Nghiệp: Vật Liệu xây dựng Cửa Hàng, Nhà Máy sản xuất, Máy móc Cửa Hàng Sửa Chữa, Thực phẩm và Đồ Uống Nhà Máy, Thực phẩm Cửa Hàng, In ấn Cửa Hàng, Xây dựng làm việc, Năng lượng & Khai Thác Mỏ, Thực phẩm và Đồ Uống Cửa Hàng, Công Ty quảng cáo
Phòng Trưng Bày Trí: Vương Quốc Anh, Ý, Nước Pháp, Đức, Philippines, Brasil, Peru, Pakistan, Tây Ban Nha, Thái Lan, Maroc, Kenya, Argentina, Nam Hàn Quốc, Algérie, Sri Lanka, Bangladesh, Nam Phi, Kazakhstan, Ukraina, NigeriaVideo Gọi Đi-Kiểm Tra: Cung Cấp
Máy Móc Báo Cáo Thử Nghiệm: Cung CấpTiếp Thị Loại: 2024 sản phẩm nóng
Bảo Hành Của Core Thành Phần: 1 NămCore Thành Phần: Động Cơ, Động Cơ
trọng lượng: 800 KGTên: Gỗ mùn cưa ống máy sấy trấu máy sấy
Mô hình: BD-HJ-4Quá trình dryig: Không khí khô
Màu sắc: Khách hàng yêu cầuNguyên liệu thô: Bột gỗ
Chức năng: Giảm độ ẩmLợi thế: Hiệu quả cao tiêu thụ thấp
Sau bán hàng dịch vụ cung cấp: Hỗ trợ kỹ thuật VideoCài đặt: Hỗ trợ video trực tuyến
Từ khóa: Máy sấy bơm nhiệt không khí nóng
High Performance And Wide Application Wood Sawdust Pipe Dryer Rice Husk Dryer Machine
Product Description
Air dryer is a hot air pulse dryer, also called hot air pipe dryer, the advantages of this dryer is direct heating, drying fast,folding installation, save space.
Air dryer is to let the wet raw material and high temperature air mixture, and finally through the separator to separate the water from the raw material. Dryer is widely used in food, feed, chemical, pharmaceutical, mining and other industries, drying equipment in the process of work as follows After the dehydrated wet materials are added to the dryer, the materials are evenly dispersed in the dryer and fully contact with the hot air under the turning of the plate evenly distributed in the pipeline, so as to speed up the heat transfer and mass transfer in the drying. In drying process, the material with copy board and heat quality, as for the dryer and a star discharge valve to discharge the finished product, working principle of the air dryer is wet granular materials into the stream, and flow, resulting in granular dry products, to create a feed resources, lower investment costs, reduce the pollution of the environment has a good effect.
Specification
Model | Power | Capacity | Weight | Moisture content |
BD-HJ-4 | 4kw | 300-400kg/h | 1000kg | 20-40% to 8-12% |
BD-HJ-6 | 4kw | 400-600kg/h | 1500kg | 20-40% to 8-12% |
BD-HJ-8 | 11kw | 700-800kg/h | 1800kg | 20-40% to 8-12% |
BD-HJ-10 | 15kw+0.75kw | 800-1000kg/h | 2500kg | 20-40% to 8-12% |
Features & Advantages
Air dryer drying intensity: air dryer due to high air velocity, the material in the gas phase of good dispersion, can take all the surface of the material as the effective area of drying, therefore, drying limited area greatly increased. At the same time, due to the dispersion and agitation during drying, the gasification surface is constantly renewed, so that the heat transfer process of drying is strong.
Short drying time: material and air contact time is very short, drying time is generally in 0.5~5 seconds, for heat sensitive or low melting point material will not cause overheating or decomposition and affect its quality.
High thermal efficiency of air flow dryer: air flow drying with material and gas flow operation, from the beginning to the end of the material temperature and air temperature can reach a reasonable state, drying time is short, so can use a higher drying temperature.
Air dryer is suitable for a wide range, high output, large precipitation range: simple structure, small station area, low investment and maintenance costs.
Hot air source: oil stove, coal stove.
Short drying time: material and air contact time is very short, drying time is generally in 0.5~5 seconds, for heat sensitive or low melting point material will not cause overheating or decomposition and affect its quality.
High thermal efficiency of air flow dryer: air flow drying with material and gas flow operation, from the beginning to the end of the material temperature and air temperature can reach a reasonable state, drying time is short, so can use a higher drying temperature.
Air dryer is suitable for a wide range, high output, large precipitation range: simple structure, small station area, low investment and maintenance costs.
Hot air source: oil stove, coal stove.
Packing & Delivery
1. Packing: Packing in standard wooden case.
2. Delivery time: Within 15 workdays after getting the down payment.
3. Payment: 50%TT payment in advance, 50%TT pay the balance before delivery.
4. Warranty: One year.
3. Payment: 50%TT payment in advance, 50%TT pay the balance before delivery.
4. Warranty: One year.
Company Profile
Henan Bedo Machinery Equipment Co.,LTD is a pioneer company in the field of manufacturing Wood Machinery, and Feed Machinery. Such as wood chipper, wood hammer mill, fish feed pellet machine, animal feed pellet machine,etc. In order to make our products attract more and more people, we have been improving technology and developing new products. We are looking forward to establishing business relationships with more and more customers from all over the world.
Contact Us
Bán chạy
Sản phẩm đã xem
38.627.832đ ~ 73.046.221đ
Số lượng
Số Mô Hình
Công suất (HP)
Key Điểm Bán Hàng
Chat
Bạn cần đăng nhập để chat với shop
Đăng nhập ngay
38.627.832đ ~ 73.046.221đ
Số lượng
Số Mô Hình
Công suất (HP)
Key Điểm Bán Hàng
Bạn có muốn huỷ bỏ đơn hàng này không ?