* This Portable CNC plasma cutting machine can cut mild steel with flame cutting, and cut high carbon steel, stainless steel,aluminum, copper and other non-ferrous metal with Plasma cutting can configurate as you required.,thus it is widely applied in industries such as machinery, automobile, shipbuilding, petro-chemical, war industry, metallurgy, aerospace, boiler and pressure vessel, locomotive etc.
Suitable for sheet processing, do word, etc., and other advertising equipment (vacuum molding machine, engraving machine,slotting machine, etc.,) the formation of advertising word processing line. Dozens of times higher than that of traditional craft processing efficiency.
Plasma Cắt Vòi Phun Và Điện Cực Đen Wolf P80 Mô Hình 1.1 1.3 1.5 1.7
5
999
Đã bán
43.125đ
35.515đ ~ 43.125đ
Loại động cơ: Động cơ bướcĐiều kiện: Mới
Nơi xuất xứ: ChinaTrọng lượng (KG): 350 KG
Bảo hành: Không có sẵnKey Điểm Bán Hàng: Độ chính xác cao
Áp dụng Các Ngành Công Nghiệp: Máy móc Cửa Hàng Sửa Chữa, Công Ty quảng cáoPhòng Trưng Bày Trí: Không có
Tiếp Thị Loại: Sản Phẩm Mới 2020Máy Móc Báo Cáo Thử Nghiệm: Không Có Sẵn
Video Gọi Đi-Kiểm Tra: Cung CấpBảo Hành Của Core Thành Phần: Không Có Sẵn
Core Thành Phần: KhácTên sản phẩm: Vòi cắt plasma và điện cực
Kích thước: 1.3 1.5 1.7Trọng lượng: 350g
Màu sắc: BạcỨng dụng: Ngọn Đuốc cắt plasma
MOQ: 10 bộĐược sử dụng cho: Máy cắt Plasma CNC
Chất lượng: Chất lượng caoVật liệu: Đồng
Sử dụng: Cắt
Product Overview
Portable CNC Plasma and Flame Cutting Machine
FEATURES AT A GLANCE
Right elevation
Left elevation
Front elevation
PRODUCT SPECIFICATIONS
Model | JX-1530 | |
Effective cutting area | 1500*3000mm | |
Cutting speed (mm/min) | 50-4000(max. 4000) | |
Input power source Machine body | 380V±10% VAC,50/60HZ Three phase 220V±10%V AC, 50/60HZ Single phase | |
Flame cutting specification (for Oxy-fuel Cutting) | Max. tractive force | |
Flame Cutting thickness (mm) | 1-80 (Oxygen + acetylene or propane) | |
Torch height controller | flame, electric height adjustment(±60mm) | |
Flame cutting gas | Oxygen+ propane or acetylene | |
Cutting torch | One piece flame cutting torch | |
Plasma cutting specification (for Plasma Cutting) | ||
Plasma Cutting thickness (mm) | 0-30mm (according to plasma power source) | |
Torch height controller | Plasma, Arc voltage height(THC) | |
Plasma cutting gas | compressed air | |
Cutting torch | 8m fine plasma torch | |
CNC controller system | FL2100B | |
Motor | Stepper motor | |
Operation precision | ±0.2mm/m | |
Guide length ×guide width ×guide thickness (mm) | 3500×273×60 | |
Nesting software | FASTCAM | |
Gas pressure (Mpa) | ±0.5 | |
Cutting tool Conversion Kit | Flame cutting and plasma cutting can change easily. Flame cutting machine add power source, ARC, plasma torch to change into plasma cutting machine | |
PRODUCT CONFIGURATION
cutting example
Product packaging
FAQ
1. Where is your factory located? How can I visit there?
Our factory is located in Jining City, Shandong Province, China. You can visit us by air to Qufu airport, or by the high-speed
rail. All the customers, from home or abroad, are warmly welcome to visit us!
2. What's the quality of your products?
We are very focused on the quality of the products, All spare parts of this machine come with best brand and best quality, after completing the installation we will test the machine for 48 hours.Our factory has gained CE, ISO9001 authentication.
3. What shall we do if don't know how to operate your machine after bought from you?
We have detailed installation and operating instructions attached, also comes with video, it is very simple. We have telephone and email support at 24 hours a day.
4. What other things also need after we bought your machines?
(1) With flame cutting: oxygen and acetylene or propane
(2) With plasma cutting: air compressor. Plasma power is purchased by us, so that we can debug online, and we all need very good plasma power to ensure quality.
5. What are your payment terms?
We support T/T, L/C and so on. Other ways can also be received after we both sides discussion and agreement.
6. All products have a warranty?
YES, Our warranty term is One Year.
Our factory is located in Jining City, Shandong Province, China. You can visit us by air to Qufu airport, or by the high-speed
rail. All the customers, from home or abroad, are warmly welcome to visit us!
2. What's the quality of your products?
We are very focused on the quality of the products, All spare parts of this machine come with best brand and best quality, after completing the installation we will test the machine for 48 hours.Our factory has gained CE, ISO9001 authentication.
3. What shall we do if don't know how to operate your machine after bought from you?
We have detailed installation and operating instructions attached, also comes with video, it is very simple. We have telephone and email support at 24 hours a day.
4. What other things also need after we bought your machines?
(1) With flame cutting: oxygen and acetylene or propane
(2) With plasma cutting: air compressor. Plasma power is purchased by us, so that we can debug online, and we all need very good plasma power to ensure quality.
5. What are your payment terms?
We support T/T, L/C and so on. Other ways can also be received after we both sides discussion and agreement.
6. All products have a warranty?
YES, Our warranty term is One Year.
Recommend Products
Số lượng
Chọn loại hàng (ví dụ:màu sắc ,kích thước)
Thông số sản phẩm
0%
35.515đ
SOYVFta8Va
Mô tả sản phẩm
Loại động cơ: Động cơ bướcĐiều kiện: Mới
Nơi xuất xứ: ChinaTrọng lượng (KG): 350 KG
Bảo hành: Không có sẵnKey Điểm Bán Hàng: Độ chính xác cao
Áp dụng Các Ngành Công Nghiệp: Máy móc Cửa Hàng Sửa Chữa, Công Ty quảng cáoPhòng Trưng Bày Trí: Không có
Tiếp Thị Loại: Sản Phẩm Mới 2020Máy Móc Báo Cáo Thử Nghiệm: Không Có Sẵn
Video Gọi Đi-Kiểm Tra: Cung CấpBảo Hành Của Core Thành Phần: Không Có Sẵn
Core Thành Phần: KhácTên sản phẩm: Vòi cắt plasma và điện cực
Kích thước: 1.3 1.5 1.7Trọng lượng: 350g
Màu sắc: BạcỨng dụng: Ngọn Đuốc cắt plasma
MOQ: 10 bộĐược sử dụng cho: Máy cắt Plasma CNC
Chất lượng: Chất lượng caoVật liệu: Đồng
Sử dụng: Cắt
Product Overview
Portable CNC Plasma and Flame Cutting Machine
* This Portable CNC plasma cutting machine can cut mild steel with flame cutting, and cut high carbon steel, stainless steel,aluminum, copper and other non-ferrous metal with Plasma cutting can configurate as you required.,thus it is widely applied in industries such as machinery, automobile, shipbuilding, petro-chemical, war industry, metallurgy, aerospace, boiler and pressure vessel, locomotive etc.
Suitable for sheet processing, do word, etc., and other advertising equipment (vacuum molding machine, engraving machine,slotting machine, etc.,) the formation of advertising word processing line. Dozens of times higher than that of traditional craft processing efficiency.
Suitable for sheet processing, do word, etc., and other advertising equipment (vacuum molding machine, engraving machine,slotting machine, etc.,) the formation of advertising word processing line. Dozens of times higher than that of traditional craft processing efficiency.
FEATURES AT A GLANCE
Right elevation
Left elevation
Front elevation
PRODUCT SPECIFICATIONS
Model | JX-1530 | |
Effective cutting area | 1500*3000mm | |
Cutting speed (mm/min) | 50-4000(max. 4000) | |
Input power source Machine body | 380V±10% VAC,50/60HZ Three phase 220V±10%V AC, 50/60HZ Single phase | |
Flame cutting specification (for Oxy-fuel Cutting) | Max. tractive force | |
Flame Cutting thickness (mm) | 1-80 (Oxygen + acetylene or propane) | |
Torch height controller | flame, electric height adjustment(±60mm) | |
Flame cutting gas | Oxygen+ propane or acetylene | |
Cutting torch | One piece flame cutting torch | |
Plasma cutting specification (for Plasma Cutting) | ||
Plasma Cutting thickness (mm) | 0-30mm (according to plasma power source) | |
Torch height controller | Plasma, Arc voltage height(THC) | |
Plasma cutting gas | compressed air | |
Cutting torch | 8m fine plasma torch | |
CNC controller system | FL2100B | |
Motor | Stepper motor | |
Operation precision | ±0.2mm/m | |
Guide length ×guide width ×guide thickness (mm) | 3500×273×60 | |
Nesting software | FASTCAM | |
Gas pressure (Mpa) | ±0.5 | |
Cutting tool Conversion Kit | Flame cutting and plasma cutting can change easily. Flame cutting machine add power source, ARC, plasma torch to change into plasma cutting machine | |
PRODUCT CONFIGURATION
cutting example
Product packaging
FAQ
1. Where is your factory located? How can I visit there?
Our factory is located in Jining City, Shandong Province, China. You can visit us by air to Qufu airport, or by the high-speed
rail. All the customers, from home or abroad, are warmly welcome to visit us!
2. What's the quality of your products?
We are very focused on the quality of the products, All spare parts of this machine come with best brand and best quality, after completing the installation we will test the machine for 48 hours.Our factory has gained CE, ISO9001 authentication.
3. What shall we do if don't know how to operate your machine after bought from you?
We have detailed installation and operating instructions attached, also comes with video, it is very simple. We have telephone and email support at 24 hours a day.
4. What other things also need after we bought your machines?
(1) With flame cutting: oxygen and acetylene or propane
(2) With plasma cutting: air compressor. Plasma power is purchased by us, so that we can debug online, and we all need very good plasma power to ensure quality.
5. What are your payment terms?
We support T/T, L/C and so on. Other ways can also be received after we both sides discussion and agreement.
6. All products have a warranty?
YES, Our warranty term is One Year.
Our factory is located in Jining City, Shandong Province, China. You can visit us by air to Qufu airport, or by the high-speed
rail. All the customers, from home or abroad, are warmly welcome to visit us!
2. What's the quality of your products?
We are very focused on the quality of the products, All spare parts of this machine come with best brand and best quality, after completing the installation we will test the machine for 48 hours.Our factory has gained CE, ISO9001 authentication.
3. What shall we do if don't know how to operate your machine after bought from you?
We have detailed installation and operating instructions attached, also comes with video, it is very simple. We have telephone and email support at 24 hours a day.
4. What other things also need after we bought your machines?
(1) With flame cutting: oxygen and acetylene or propane
(2) With plasma cutting: air compressor. Plasma power is purchased by us, so that we can debug online, and we all need very good plasma power to ensure quality.
5. What are your payment terms?
We support T/T, L/C and so on. Other ways can also be received after we both sides discussion and agreement.
6. All products have a warranty?
YES, Our warranty term is One Year.
Recommend Products
Bán chạy
Sản phẩm đã xem
35.515đ ~ 43.125đ
Số lượng
Chat
Bạn cần đăng nhập để chat với shop
35.515đ ~ 43.125đ
Số lượng
Bạn có muốn huỷ bỏ đơn hàng này không ?