PVC tráng tạm thời an toàn hàng rào xây dựng các trang web khung thép mạ kẽm mùa thu phòng chống cạnh bảo vệ rào cản cửa dây
PVC Coated Building Construction Site Temporary Fall Prevention Edge Protection Barrier Fence 

 
steel mesh barrier system closed toe board impact-absorbing capacity versatile barrier reinforced building edges protection barrier fence
|
Wire diameter |
5-8mm |
|
Opening size |
50*200mm |
|
Panel size |
1100*1700/1100*2400mm/1300*1300mm/1300*2200mm |
|
Post diameter/thickness |
48*1.5/2.0mm |
|
Surface treatment |
Galvanized+powder coated / galvanized+painted /black +powder coated |


Fall Edge Protection Barrier Fence also named Edge Protection Barrier Fence,Temporary edge protection Fence,Safety Edge Barrier Fence,building protection barrier Fence,edge protection fence is fully used in construction under building to protect people.
This simple to install system offers site personnel maximum protection on the perimeter of construction slabs, around stair and lift wells, excavations etc. The removable panels, with built-in kickplates, and post system is easily transported, installed removed and stored.

The 2600mm x 1200mm galvanised welded mesh panel are manufactured from 5mm to 8mm steel wire with centre not exceeding 300mm, complying with EN Standard.
Featuring 90 degree bending top and bottom, incorporating a galvanised kickplate that helps prevent objects falling through the panel bottom.
The edge protect barrier system is an ideal choice, easy and fast to install.
 Edge Fall building protection Barrier Fence installed

1.The Raw Material is Low-Carbon Steel Wire(Q195),
Welded By Heavy Wire,
with 90 Degree on the top and bottom,
the piece of toe board was welded on the bottom of the Edge protection Fence to Protect Small Stone Falling ,avoid hurting somebody.
It also has continous Wire, no cut wire, make the Temporary Protection Fence Smooth, Flat and Straight
 
2.Bending on the Top of Edge Protection Fence
There is a 90 Degree Bending on the top of Temporary Edge Protection Fence,
It is straight, make the fence flatling,
have high shock strength to protect Peoples.
3.make the Temporary Portection Fence Smooth, Flat and Straight.
Powder Coated Surface Treatment is more beautiful and anti-rust,
Make its long using life to save the cost
4.The Edge Safety Protection Fence can recycle many times
Bending on the bottom of Edge protection Fence
Toe Board on the front of Edge Protection Fence
The Toe Board on the bottom of Edge Protection Fence is welded on the Bottom Wire, to Prevent Small Stone falling ,Avoid Hurting Somebody.
 
Edge building protection Barrier Fence producing process

PVC Coated Safety Building Construction Edge Fall Protection Barrier Fence packing:in pallet or bulk

 
 
Hebei Gaint Metal Technology Co.,ltd,Our company has passed onsite assessment was conducted by SGS, Our products offer 10 YEARS GUARANTEE. 
Our company is located in the "Wire Mesh Homeland of China" - Anping Town of Hebei, China.
We has passed the quality management system ISO9001: 2008, environmental management system ISO14001: 2004, occupational health and safety
management system GB / T28001: 2011. We have exported more than 10 countries and regions, mainly the United States, Russia, Australia, Japan, and France.
Quality and Service is Our Priority
We have our own quality test office, we test our products before delivery.
We take our responsibility to our customers very seriously, we are responsible for every product, your satisfaction is to give us the best repayment.


 
Our Services-Before-sales
1. Guarantee over 98% pass rate.
2. Commonly loading the goods in 20 working days.
3. OEM and ODM orders acceptable
4. Free samples for reference
5. Free drawing and deigns according to clients&rsquo requires
 After-sales service
 Our after-sales service start immediately after signing the contract.     
 1. No matter FOB or CIF the price term is we would try our best to find a lowest freight cost for customers' reference. 
 2. Feedback of production schedule and photos every week 
 3. Installation test for semi-finished and finished products, confirm all the goods can installation smoothly.
 4. 3-20 years warranty depends on different products and using environment.
5. pay attention to the tracking of shipping, inform you the ETA for early arrange Custom clearance
PVC Coated Building Construction Site Temporary Fall Prevention Edge Protection Barrier Fence 

 
steel mesh barrier system closed toe board impact-absorbing capacity versatile barrier reinforced building edges protection barrier fence
|
Wire diameter |
5-8mm |
|
Opening size |
50*200mm |
|
Panel size |
1100*1700/1100*2400mm/1300*1300mm/1300*2200mm |
|
Post diameter/thickness |
48*1.5/2.0mm |
|
Surface treatment |
Galvanized+powder coated / galvanized+painted /black +powder coated |


Fall Edge Protection Barrier Fence also named Edge Protection Barrier Fence,Temporary edge protection Fence,Safety Edge Barrier Fence,building protection barrier Fence,edge protection fence is fully used in construction under building to protect people.
This simple to install system offers site personnel maximum protection on the perimeter of construction slabs, around stair and lift wells, excavations etc. The removable panels, with built-in kickplates, and post system is easily transported, installed removed and stored.

The 2600mm x 1200mm galvanised welded mesh panel are manufactured from 5mm to 8mm steel wire with centre not exceeding 300mm, complying with EN Standard.
Featuring 90 degree bending top and bottom, incorporating a galvanised kickplate that helps prevent objects falling through the panel bottom.
The edge protect barrier system is an ideal choice, easy and fast to install.
 Edge Fall building protection Barrier Fence installed

1.The Raw Material is Low-Carbon Steel Wire(Q195),
Welded By Heavy Wire,
with 90 Degree on the top and bottom,
the piece of toe board was welded on the bottom of the Edge protection Fence to Protect Small Stone Falling ,avoid hurting somebody.
It also has continous Wire, no cut wire, make the Temporary Protection Fence Smooth, Flat and Straight
 
2.Bending on the Top of Edge Protection Fence
There is a 90 Degree Bending on the top of Temporary Edge Protection Fence,
It is straight, make the fence flatling,
have high shock strength to protect Peoples.
3.make the Temporary Portection Fence Smooth, Flat and Straight.
Powder Coated Surface Treatment is more beautiful and anti-rust,
Make its long using life to save the cost
4.The Edge Safety Protection Fence can recycle many times
Bending on the bottom of Edge protection Fence
Toe Board on the front of Edge Protection Fence
The Toe Board on the bottom of Edge Protection Fence is welded on the Bottom Wire, to Prevent Small Stone falling ,Avoid Hurting Somebody.
 
Edge building protection Barrier Fence producing process

PVC Coated Safety Building Construction Edge Fall Protection Barrier Fence packing:in pallet or bulk

 
 
Hebei Gaint Metal Technology Co.,ltd,Our company has passed onsite assessment was conducted by SGS, Our products offer 10 YEARS GUARANTEE. 
Our company is located in the "Wire Mesh Homeland of China" - Anping Town of Hebei, China.
We has passed the quality management system ISO9001: 2008, environmental management system ISO14001: 2004, occupational health and safety
management system GB / T28001: 2011. We have exported more than 10 countries and regions, mainly the United States, Russia, Australia, Japan, and France.
Quality and Service is Our Priority
We have our own quality test office, we test our products before delivery.
We take our responsibility to our customers very seriously, we are responsible for every product, your satisfaction is to give us the best repayment.


 
Our Services-Before-sales
1. Guarantee over 98% pass rate.
2. Commonly loading the goods in 20 working days.
3. OEM and ODM orders acceptable
4. Free samples for reference
5. Free drawing and deigns according to clients&rsquo requires
 After-sales service
 Our after-sales service start immediately after signing the contract.     
 1. No matter FOB or CIF the price term is we would try our best to find a lowest freight cost for customers' reference. 
 2. Feedback of production schedule and photos every week 
 3. Installation test for semi-finished and finished products, confirm all the goods can installation smoothly.
 4. 3-20 years warranty depends on different products and using environment.
5. pay attention to the tracking of shipping, inform you the ETA for early arrange Custom clearance
Bạn cần đăng nhập để chat với shop